How to Install Nock Out® Lighted Nocks

/ in In Action Blog /

Installing Lighted Nocks | Nock Out® Contender Nocks

Nock Out® lighted nocks has developed an impressive lighted nock for compound shooters that is durable and accurate while existence simple and easy to use. The Contender vertical lighted nocks fit X,H,Due south/GT shafts with the included universal bushing kit independent in each package, making them the perfect fit no affair what size pointer shaft is in your archery setup.

Nock Out® includes the needed bushings to make the Contender lighted nocks truly a universal fit for any arrow in the manufacture from 5mm all the way upwards to 6.5mm shafts. Installing the nocks at dwelling is an like shooting fish in a barrel procedure that requires few tools. Some items yous will desire to have on hand include bowstring wax, a pair of needle nose pliers, and possibly a universal nock tool for inserting and indexing nocks. Organize your arrow shafts, tools, and Contender nocks on a clean level work surface, and follow these few steps to smoothly install your new Contender lighted nocks past Nock Out.

Lancaster Archery Supply – Lighted Nock Contender Install

Steps to Proper Lighted Nock Setup

  • Remove the orange C clamp located midway on the nock body with needle nose pliers. This prune is used strictly for packaging purposes.
  • Identify the pointer shaft size and the appropriate bushing for your arrow shaft.
    • Contender nocks fit 5mm or X shafts directly from the package with no bushing required.
    • 6mm (H) and 6.5mm (S/GT) shafts require the use of the included advisable bushing.
  • For 5mm or 10 shafts at .204" ID the Contender Nocks are ready to install after the removal of the orangish C clench. Simply utilise a liberal corporeality of bowstring wax to the lower nock body and insert the nock into the shaft. Take intendance to alphabetize the nock to the arrow fletching according to your arrow rest. Never force your Contender Nocks into the shaft by forcing the nock and shaft down onto a hard surface without a nock tool.
  • When installing the Nock Out® Contender nocks into 6mm (H) or 6.5mm (S/GT) arrow shafts, first remove the orange C clip on the lower nock body. Identify the appropriate bushing for your arrow shaft from the packaging. Insert the nock into the bushing before pushing the bushing into the pointer shaft. Subsequently installing the nock into the appropriate bushing with the orange C clip removed, utilize liberal bowstring wax to the exterior of the bushing and insert into your arrow shaft. Take care to index the nock to the arrow fletching according to your arrow rest. Again, never force your Contender Nocks into the pointer shaft by forcing the nock and shaft downwardly onto a difficult surface without a nock tool.
  • Key takeaways to installing the Contender lighted nocks are to be sure and use bowstring wax on the nock body during installation, do not force the nock into the arrow shaft by pressing the nock down onto a hard surface, and remember to index the nock according to your arrow'due south fletching and bow rest.

The Contender lighted nocks are activated by string pressure level at the shot. During the installation process it is piece of cake to pull back on an installed nock that has been activated to turn off the illumination. Exist certain your lighted nocks are not activated when you end the installation process to conserve battery life.